Skip to main content
DrywallPlanner

Drywall Weight Calculator

Forty sheets of 4x12 drywall in 5/8 in type X weigh about 4,224 lb at USG's 2.2 lb per sq ft, 106 lb a sheet and 211 lb a bundle. A pickup with a 1,500 lb payload carries 14 sheets a trip, so the order takes three trips.

Weight per sheet by thickness and size, per two-sheet bundle and for your whole order, and how many sheets your vehicle can carry per trip.

  • 1/4 to 5/8 in
  • 4x8 to 4x12
  • Bundles
  • Trips per vehicle

Board

Thickness and type
Sheet size

Load

lb
From the door jamb sticker

Your estimate

1/2 in regular, 1.6 lb per sq ft
51lb per sheet
102 lb per 2-sheet bundle

Your load

20 sheets1,024 lb
Bundles10two sheets each
Sheets per trip29at 1,500 lb payload
Trips1

Weights are the manufacturer's published lb per sq ft, approximate for design and shipping. Payload includes everyone and everything else in the vehicle, so leave a margin.

Pick the board thickness and sheet size, then enter how many sheets you are buying and your vehicle's payload. The calculator gives the weight per sheet, per two-sheet bundle and for the whole order, and how many trips it takes to bring home.

Example: 40 sheets of 4x12, 5/8 in type X, at USG's 2.2 lb per sq ft. Each sheet is about 106 lb, a bundle about 211 lb, and the order about 4,224 lb in 20 bundles. A pickup with a 1,500 lb payload carries 14 sheets a trip, so three trips. That payload also has to cover the driver, so leave a margin.

A 4x8 sheet of standard 1/2 in drywall weighs about 51 lb, a sheet of 5/8 in type X about 70 lb, and a lightweight 1/2 in panel about 40 lb, by USG's published weights per square foot. Multiply by the sheet area for bigger sheets: a 4x12 sheet of 5/8 in type X is over 100 lb. The calculator does the arithmetic for the board you are buying and tells you how many trips your truck will take.

How much a sheet of drywall weighs

  • 1/4 in: about 1.2 lb per sq ft, 38 lb for a 4x8.
  • 3/8 in: about 1.4 lb per sq ft, 45 lb for a 4x8.
  • 1/2 in lightweight: about 1.25 lb per sq ft, 40 lb for a 4x8.
  • 1/2 in regular: about 1.6 lb per sq ft, 51 lb for a 4x8.
  • 5/8 in lightweight type X: about 1.8 lb per sq ft, 58 lb for a 4x8.
  • 5/8 in type X: about 2.2 lb per sq ft, 70 lb for a 4x8 and 106 lb for a 4x12.

USG describes these weights as approximate, for design and shipping purposes. The 1/4, 3/8 and 1/2 in regular figures come from an older USG submittal, since regular 1/2 in board has largely been replaced by lightweight panels.

Bundle weight and loads

A bundle is two sheets taped face to face, so it weighs twice the sheet. In 4x8, that is about 80 lb for lightweight 1/2 in, 102 lb for regular 1/2 in and 141 lb for 5/8 in type X. A 4x12 bundle of type X is about 211 lb. Every one of those is a two-person carry. For how bundles are packed and how many sheets come on a pallet or lift, see the drywall bundle and pallet guide.

For a pickup, check the payload on the door jamb sticker: it includes passengers and anything else in the bed, so leave a margin.

Weights for 4x9 and 4x10 sheets

The same USG weights per square foot, times 36 sq ft for a 4x9 and 40 sq ft for a 4x10:

  • 1/4 in: 43 lb for a 4x9, 48 lb for a 4x10.
  • 3/8 in: 50 lb for a 4x9, 56 lb for a 4x10.
  • 1/2 in lightweight: 45 lb for a 4x9, 50 lb for a 4x10.
  • 1/2 in regular: 58 lb for a 4x9, 64 lb for a 4x10.
  • 5/8 in lightweight type X: 65 lb for a 4x9, 72 lb for a 4x10.
  • 5/8 in type X: 79 lb for a 4x9, 88 lb for a 4x10.

Sheets per trip on a 1,500 lb payload

Dividing a 1,500 lb payload by the sheet weight, rounded down, gives the most sheets per trip before the driver and any tools are counted:

  • 4x8, 1/2 in lightweight at 40 lb: 37 sheets.
  • 4x8, 1/2 in regular at 51 lb: 29 sheets.
  • 4x8, 5/8 in type X at 70 lb: 21 sheets.
  • 4x12, 5/8 in type X at 106 lb: 14 sheets.

Payload is not the only limit. A 4x8 sheet lies flat in an 8 ft bed with the tailgate closed, but a 4x10 or 4x12 sheet overhangs a standard bed and needs the load tied down and flagged under your local rules, or a delivery.

When the lighter board is worth it

Lightweight 1/2 in board saves about 11 lb per 4x8 sheet against regular 1/2 in, which over a 40 sheet order is about 440 lb less to load, carry and lift. The saving matters most overhead: the board for a 12 x 12 ft ceiling weighs about 180 lb in lightweight 1/2 in and about 317 lb in 5/8 in type X, and every sheet of it is held in place by hand or a lift while it is screwed off.

Weight is never the reason to drop type X where a code calls for it, such as a garage ceiling under living space. The comparison of 1/2 in and 5/8 in board covers where each one is required.

Frequently asked questions

How much does a sheet of 5/8 drywall weigh?

About 70 lb for a 4x8 sheet of standard 5/8 in type X, at USG's 2.2 lb per sq ft, and about 106 lb for a 4x12. Lightweight 5/8 in type X is about 58 lb for a 4x8.

How much does a 4x8 sheet of 1/2 drywall weigh?

About 51 lb for regular 1/2 in board at 1.6 lb per sq ft, and about 40 lb for lightweight 1/2 in panels at 1.25 lb per sq ft.

How much does a 4x12 sheet of drywall weigh?

About 60 lb for lightweight 1/2 in, 77 lb for regular 1/2 in, 86 lb for lightweight 5/8 in type X and 106 lb for standard 5/8 in type X, from USG's weights per sq ft times the 48 sq ft sheet.

How many sheets of drywall can a pickup carry by weight?

Divide the payload on the door sticker by the sheet weight. At 1,500 lb that is 37 sheets of 4x8 lightweight 1/2 in, 29 of regular 1/2 in or 21 of 5/8 in type X, before you count the driver.

Primary references

USG's published weights per square foot set the sheet, bundle and order weights, and the manufacturer packaging data covers how sheets are bundled.