Drywall Calculators by Job
For a 14 x 12 ft room with one door and two windows, the walls take 9 sheets of 4x12 at 8 ft, 10 at 9 ft and 10 at 10 ft. A 6 in 12 vault over a 16 x 14 ft room takes 17 sheets, 2 more than a flat ceiling, and a 9 ft stairwell 6 sheets of 4x14.
The jobs a plain room estimate gets wrong: walls taller than two rows of board, a ceiling that follows the roof, and the rake walls beside a stair. Each has its own calculator with its own layout rules.
| Page | Key number | Default case |
|---|---|---|
| 8 ft walls | 9 sheets of 4x12 | two rows of 48 in board, no strip; 14 x 12 ft room, one door, two windows, walls only |
| 9 ft walls | 9 sheets of 54 in x 12 ft, or 10 of 4x12 | same room; 54 in board makes 9 ft in two rows, 48 in board needs a ripped strip |
| 10 ft walls | 10 sheets of 4x12, or 13 of 4x10 stood up | same room; vertical 4x10 has no butt joints, horizontal 4x12 needs a 2 ft strip |
| Vaulted ceiling | 17 sheets of 4x12, 2 more than a flat ceiling | 16 x 14 ft room, 8 ft walls, 6 in 12 pitch, slopes and both gables |
| Stairwell | 6 sheets of 4x14, or 10 of 4x8 | 9 ft floor to floor, 14 risers, 270 sq ft of rake wall, end wall and sloped ceiling with 15% for angled cuts |
The main drywall calculator assumes a rectangular room with flat walls and a flat ceiling. The five calculators on this page handle the cases where that assumption costs you sheets. Wall height is the common one: 48 in board covers an 8 ft wall in two rows and nothing else cleanly, so 9 and 10 ft walls each get a page comparing stock board with a ripped strip, 54 in board and sheets stood on end. A vaulted ceiling adds sloped planes longer than the room is wide plus two gable triangles. A stairwell adds parallelogram rake walls that are too tall to reach from the stairs. All five run the same layout engine as the main calculator, so their counts can be compared with it directly.
Wall height: 8, 9 or 10 ft
The three height pages share one example room, 14 x 12 ft with a door and two windows, so the counts can be read against each other: 9 sheets of 4x12 at 8 ft, 10 at 9 ft because of the strip row, and 10 at 10 ft. At 9 ft the better buy is 54 in wide board, which covers the wall in two rows and 9 sheets; at 10 ft it is 4x10 stood on end, 13 sheets with no butt joints at all. The main calculator only stocks 48 in board, which is why these pages exist.
Shape: vaults and stairs
A 6 in 12 vault over a 16 x 14 ft room takes 17 sheets of 4x12 where a flat ceiling takes 15, because the slopes are about 12% larger than the flat ceiling and the gable triangles add 49 sq ft more. The stairwell calculator works the other way round: it starts from the floor-to-floor height, finds the risers and run within the IRC limits, and only then measures the walls, which is why its sheet length is a result rather than an input. Both pages carry 15% waste on the angled cuts, more than the 10% a flat room gets.
Tall and sloped board is hung from staging or a lift and finished overhead, so labor runs higher than the square footage suggests. The labor cost pages give a per sq ft crew cost by state, and the cost calculator prices the whole job once you have the sheet count from one of these pages.
